TECHNICAL REFERENCE / PROJECT ENQUIRY

RS-CO2-001-01 RS485 CO2 Probe

Name: RS-CO2-001-01 RS485 CO2 Probe
Brand: ROGERSENSE
SKU: RS-CO2-001-01

CO2 / NDIR · 400-5000 ppm

Material reference: RS-CO2-001-01. Brand: ROGERSENSE. Hardware and document revision are confirmed for each project.

Discuss your integration project

Define the sensing task, interface and installation requirements with our engineering team.

Model-specific values and conditions. Unconfirmed values are marked TBD.

Parameter	Published value / condition	Ref.
Target / principle	CO2 / NDIR · Not CO, combustible gas or a multi-gas detector	G1
Range	400-5000 ppm	G2
Accuracy	+/-50 ppm at 400-2000 ppm; +/-100 ppm above 2000 ppm · Factory test conditions and drift basis TBD	G2
Supply / current	12 V DC / <10 mA	G2
Interface / protocol	RS485 / Modbus RTU	G1
Serial setting	9600 bit/s default; 8 data bits, no parity, 1 stop bit · CRC check; confirm device address and register map	G3
Response / stabilisation	5 s / 60 s · Response definition TBD	G2
Operating environment	-30 to +80 deg C; 5-90% RH · Condensation and accuracy limits TBD	G2
Mechanical	M18 thread; 75 x 16.5 mm; 1 m cable · Mounting drawing remains authoritative	G2
Housing / protection	Plastic / IP65 as published · Not a metal explosion-proof gas probe	G2

Signal / item	Source reference	Ref.
Red	12 V VCC, selected specification	G2
Green	GND	G2
Yellow	RS485 A	G2
Blue	RS485 B	G2

Units: mm. Source dimensions only; unavailable details are TBD.

Item	Published value / condition	Ref.
Body length / diameter	75 / 16.5 mm	G4
Thread / nut dimension	M18 / 23 mm as labelled	G4
Cable length / housing	1 m / plastic	G1/G2
Mounting tolerance / seal condition	TBD / TBD	G4

Capability	How it is provided
Device interface	Refer to model-specific documentation
MQTT	Acquisition and gateway integration available; model-specific scope to agree
OTA	Firmware and update lifecycle services available; compatible device scope to agree